BrightSign HD120 Guía de usuario descargar pdf (Pagina 18)

5. Under Unit Configuration, click Networked with Local File Networking, and then specify the following:

• (Optional) Enable diagnostic web server: Check the checkbox to enable the diagnostic web server. You

can include a username and password in the text fields below for added security.

• (Optional) Enable local web server: Check the checkbox to enable the local web server. You can include a

username and password in the text fields below for added security.

6. Under Logging, check any of the following checkboxes to enable/disable logs:

• Enable playback logging: Creates a log that specifies when a playlist was used.

• Enable event logging: Creates a log that specifies when events are triggered.

• Enable diagnostic logging: Creates a log that provides troubleshooting information.

7. Create and install the setup files:

a. Click Create Setup Files.

b. Browse to and select an SD card (recommended) or USB flash drive (HD810, HD1010, HD1010w, and

HD1020 only) to store the setup files.

c. Click OK.

d. Turn off the BrightSign unit by unplugging the power adapter. Insert the card or flash drive into the unit.

e. Turn on the BrightSign unit by reconnecting the power adapter.

Important: Do not remove the SD card or flash drive from the player.

Adding BrightSigns to your Simple File Network

With simple file networking, the setup file provides details about your network, the web folder associated with a unit,

where presentations are stored, and when to check for updates.

1. In the BrightAuthor menu bar, click Tools > Setup BrightSign Unit.

2. Under Name Specification, do the following:

a. Enter a Name and Description for this unit.

b. Select whether you want to append the unit ID to the name or use only the name.

3. Under Network Properties, set the following:

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 104 105

Sin comentarios

BrightSign HD120 Guía de usuario Pagina 18