BrightSign Roku Compact Guía de usuario descargar pdf (Pagina 13)

•

3 Extract the software update file onto your SD card. (The file name is UPDATE.ROK.)

4 Insert the SD card into your BrightSign and apply power.

•

HD2000:

Wait for your BrightSign to boot. (The display will be blank, but the LEDs on the front

panel light as the unit boots.) Wait for the red upgrade LED to light up. During the upgrade,

the connector activity LEDs turn on and off to indicate that the upgrade is in progress.

•

HD110, HD210, HD410, HD810, and HD1010:

Wait for your BrightSign to boot. (The display

will be blank but the Bsy LED flashes as the unit boots). During the upgrade, the yellow Upd

LED flashes to indicate that the upgrade is in progress.

NOTE:

When the update finishes, BrightSign deletes the UPDATE.ROK file and reboots the unit.

However, if the card was formatted with NTFS or HFS+, then BrightSign does not delete the

UPDATE.ROK file and the unit doesn’t reboot after the update.

Step 3: Try the demo

The BrightSign demo shows an example of an interactive digital sign that displays still slides and

video clips, and responds to input from a button board, touch screen, or mouse. It’s easy to try if

you have a BrightSign. Follow these steps:

1 Download the demo for your BrightSign model:

•

HD2000:

Click the

HD2000 Demo

link.

•

HD110, HD210, HD410, HD810, and HD1010:

Click the

HDCompact Demo

link.

2 Unzip the BrightSignDemo.zip file and copy the contents into the root directory of an

SD card.

3 Connect your BrightSign to either of the following:

•

Elo touch screen

•

Standard monitor and USB Mouse

•

Standard monitor and Roku Button Board

4 Insert the SD card.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 117 118

Sin comentarios

BrightSign Roku Compact Guía de usuario Pagina 13